As a boating enthusiast, taking good care of your outboard motor is essential to ensure its longevity and optimal performance. Part of this routine is priming your fuel line, which is necessary to avoid engine failure and other complications. But how exactly do you prime a new outboard fuel line? In this article, we’ll be walking you through the steps you need to take.
Step 1: Prepare your tools and equipment
Before you start the priming process, it’s essential to prepare the tools and equipment that you will need. This includes a fuel supply tank, a primer bulb, a set of pliers, and a fuel hose. Once you have all the items readily available, you can proceed to the next step.
Step 2: Install the fuel supply tank
Next, you need to install the fuel supply tank to your outboard motor. Make sure that it is filled with the required amount of fuel, and the level is sufficient to reach the fuel line. You also need to have the fuel hose and primer bulb at the ready.
Step 3: Connect the fuel hose to the tank and outboard
Once the fuel supply tank is secured, you can connect the fuel hose to the tank’s valve and the outboard motor. To do this, use a set of pliers to tighten the fittings properly. Make sure that the hose is securely attached and doesn’t have any leaks.
Step 4: Place the primer bulb in between the fuel line
Now it’s time to place the primer bulb in between the fuel line. Locate the bulb, which can typically be found near the fuel filter or along the hose. Attach the bulb to the fuel line and test if there are any leaks.
Step 5: Squeeze and release the primer bulb
To prime your new outboard fuel line, you need to squeeze and release the primer bulb several times. With the fuel supply tank valve open and the bulb positioned between the fuel lines, squeeze the primer bulb several times until fuel starts to flow through the line. Continue squeezing until the fuel line is primed, which you can determine by the hose getting hard to compress.
Step 6: Start the motor
Finally, you can start the outboard motor. Turn the key until the motor starts, and monitor the fuel line for any signs of leaks or air bubbles.
Priming your new outboard fuel line is a necessary process that will ensure the optimal performance of your engine. By following these simple steps, you can keep your boat running smoothly and avoid any potential complications. So be sure to make priming your fuel line a part of your regular maintenance routine.