As a boat owner, encountering water in the motor is a common occurrence that can be quite frustrating. However, there are several ways to remove water from a boat’s motor quickly and efficiently.
Firstly, the easiest way to remove water from a boat’s motor is to tilt the motor upwards so that the water drains out. This is particularly effective if you have a motor that has a tilt feature. This method will allow the water to flow out of the motor and prevent further damage.
Secondly, you can remove the spark plugs and turn the motor over for several seconds to force out the water that could be present in the engine. This will allow the water to escape from the cylinders, and once you put the plugs back in, it’s ready to run again.
If you have a larger motor, you might have a rubber drain plug located near the bottom of the motor. You can remove this plug to drain the accumulated water out of the motor. It’s crucial to check this occasionally since it often collects water while the boat is in storage.
Another method of removing water from the motor is to use a pump kit. This kit consists of a small hand pump and a hose to suck out the water in the motor. You may use this kit to pump out the water if your boating situation calls for it.
You can also use a chemical that is specially formulated to remove water from the motor. This chemical is poured into the fuel tank, and then you run the engine to allow it to circulate through the engine system to eliminate any water present.
It’s essential to remove water from the motor as soon as possible to avoid potential damage to the boat. Fortunately, there are several ways to do this quickly and efficiently, and these methods are easy to carry out by yourself. With these tips, you’ll be able to keep your boat running smoothly all year round, even when it’s faced with water issues.